BetaNo feature or time limits right now.About the beta

Any OS

Blog ·

VMware Fusion Alternative for Apple Silicon Macs

Looking for a VMware Fusion alternative on Apple Silicon? See how Fusion and Any OS differ and which one fits, depending on what you need.

The criteria to check first if you use Fusion

If Fusion already does everything you need, there is no reason to switch. Broadcom offers Fusion Pro free to personal, educational, and commercial users alike. However, on Apple Silicon Fusion only runs Arm64 guests such as Windows 11 Arm, and Broadcom's Apple Silicon feature table lists Unity mode and Easy Install as No. If you need those, Any OS is worth opening alongside it.

  • Windows and Ubuntu app windows appear like Mac windows, with a Dock icon for each app.
  • Pick an OS and the app downloads the installation image and finishes the install.
  • DirectX 9, 10, 11, 12, Vulkan, and OpenGL graphics are accelerated by the Mac GPU.
  • Agents such as Claude Code and Codex only see and operate the VMs you allow.
  • You can save checkpoints to return to, and documentation, a help center, and technical support are available.

Fusion is free and Any OS is also free during the beta, so price does not decide the choice. The most accurate way is to download both and check them yourself on the same Windows 11 installation.

Selection criteria and Fusion vs Any OS comparison

Switch only when you have a clear reason. The table below shows which one fits for each need.

What you needLook at first
Mixing Windows app windows with Mac appsAny OS seamless mode
Picking an OS and having the install finish automaticallyAny OS guided install
Running DirectX 12 apps in a Windows VMAny OS (see the benchmark values below)
Opening Mac folders as drives in a Windows guestAny OS shared folders
Handing one VM to an AI agentAny OS AI agents
Keeping an environment already set up with a Broadcom accountStay with Fusion
Running old Windows such as XP, 7, or 8Neither applies
The Fusion entries reflect Broadcom's Apple Silicon feature table in its knowledge base, checked on November 21, 2026. They may differ by version, so also check the table for the version you use.

Feature comparison on Apple Silicon

The Fusion column lists only what Broadcom has published for Apple Silicon. Items that are not listed were left out of the table rather than left blank.

ItemVMware FusionAny OS
PriceFree, no license key neededFree in beta, Free plan after the full release
DownloadBroadcom Support Portal accountStraight from the download page
GuestsArm64 only, Windows 11 Arm supportedWindows 11, macOS, Linux (all ARM64)
Unity mode, seamlessNo on Apple SiliconSupported on Windows and Ubuntu
InstallEasy Install: NoGuided install
DirectXTable lists DirectX 11 graphics as Yes (13.5 and later)DirectX 9, 10, 11, 12 listed
Shared foldersLinux guests onlyBoth Windows and Ubuntu
SnapshotsYesCheckpoints
AI agentsNot in the tableOperate VMs over MCP, with permission levels

Neither product runs Intel x86 operating systems as they are. On Apple Silicon, both can only use Arm64 guests. For Windows licensing, you also buy a license separately from Microsoft with both Fusion and Any OS.

Seamless mode and guided install

The first thing Fusion users tend to miss is Unity mode. Broadcom's table lists Unity mode as No on Apple Silicon. Any OS seamless mode hides the VM window and shows only Windows and Ubuntu app windows on your Mac screen.

  • Only the open app windows appear like Mac windows, and stacking order and focus match what they are inside the VM.
  • VM apps appear in the Dock separately, so you can mix them with Mac apps.
  • Quitting an app from the Dock closes that app's windows inside the VM.
  • Turn it on or off from the menu bar with View > Seamless Mode.

Installation differs too. Because Easy Install is No on Apple Silicon, Fusion needs you to prepare an installation image and follow the installer screens yourself. In Any OS, you choose Windows 11 in New Virtual Machine and set only a user name, and the app handles everything from downloading the image to installing it. The full walkthrough is in the Quick start.

GPU acceleration and DirectX 12 benchmarks

Broadcom's table lists DirectX 11 graphics as Yes for Fusion 13.5 and later. DirectX 12 is not listed, so if the app you use requires DirectX 12, run it yourself to check. Any OS states that it accelerates DirectX 9, 10, 11, 12, Vulkan, and OpenGL graphics on the GPU in Windows 11, and under Resolution and refresh rate it also supports a setting that follows your Mac display up to 120 Hz.

These are results from Any OS running five 3DMark benchmarks on native macOS and in a Windows 11 VM on the same Mac Studio (M5 Max). Native is treated as 100%.

BenchmarkVM result (relative to native)
Solar Bay129.9%
Steel Nomad Light136.3%
Wild Life Extreme92.7%
Solar Bay Extreme89.3%
Steel Nomad76.9%

Test conditions and the full table are in the 3DMark comparison post. These values were measured on Any OS only and are not a comparison with Fusion. They are also not a guarantee that any individual game will run well.

AI agents, checkpoints, and support

Any OS has an AI agents feature. Agents such as Claude Code and Codex can view a VM's screen, send input, and run commands over MCP. You set the permission level separately for each VM.

LevelWhat the agent does
OffThe VM is invisible to agents (default)
ViewSees only the list, status, and screen
ControlInput, commands, start and stop, saving checkpoints. Dangerous actions are confirmed every time
Full autoRuns the dangerous actions you chose without asking

A checkpoint keeps the disk and boot state of a powered-off VM, and restoring one creates a new VM from that point while leaving the original VM as it is. If you save one before handing work to an agent, you can start again from the same starting point when you do not like the result. Fusion snapshots can serve the same purpose, so this item is a difference in approach, not in quality.

Support is community support on the Free plan and technical support with Personal and Team licenses. Documentation and the help center are available on every plan. The documentation explains how to collect logs and submit them to technical support when a problem occurs.

How to try Any OS without removing Fusion

Any OS cannot import Fusion VMs. We recommend leaving Fusion as it is, creating a new VM in Any OS, and comparing only the items you need.

  1. 1.Check that your Apple Silicon Mac has macOS 26 Tahoe or later, and install the app from the download page.
  2. 2.Choose Windows 11 in New Virtual Machine and finish the guided install.
  3. 3.Install the apps you use and try View > Seamless Mode to see how it feels to use them like Mac windows.
  4. 4.If you have an app or benchmark that needs DirectX 12, run it under the same conditions.
  5. 5.Based on the results, decide whether to keep using Fusion or move only some work to Any OS.
You buy a Windows license separately from Microsoft. As with Fusion, one license is needed for each Windows 11 instance.

Frequently asked questions

Fusion is free, so is there any reason to use Any OS?

The reason is features, not price. If you do not need seamless mode, guided install, the DirectX 9, 10, 11, 12 GPU acceleration listing, or AI agents, you can keep using Fusion.

Is Any OS cheaper than Fusion?

No. Fusion is free, and Any OS is also free during the beta. After the full release, you still get 14 days of every feature, and then you can keep going with the Free plan of 1 VM without a license. To use every feature you need a one-time perpetual license (with one year of updates), and there is no subscription. See pricing for exact amounts.

Does it run Intel Windows or x86 Linux?

No. On Apple Silicon Fusion runs only Arm64 guests, and Any OS supports Windows 11 ARM64, macOS, and ARM64 Linux. Check the supported list on the supported OS page.

Can I use a Linux VM in seamless mode too?

It is supported on Ubuntu. Support for other distributions follows the supported OS page.

Can I move a Fusion VM to Any OS?

We do not document a feature for converting and opening VM files. Create a new VM and move your files by connecting a Mac folder as a shared folder.

Getting started

Download the app from the download page and install it. The requirements are an Apple Silicon Mac and macOS 26 Tahoe or later, and the details are in the system requirements. During the beta there are no limits on features or usage period.

  • Even after the full release, you can use every feature free for 14 days.
  • After that, keep using the Free plan with 1 VM, 2 vCPUs and 4 GB of memory per VM. AI agents and Toolbox are not included.
  • The Personal license is $49 (early-bird $24.5 through December 31, 2026) and Team is $69 per seat (early-bird $34.5). A perpetual license includes one year of updates.
  • Renewal is $39 for Personal and $59 for Team, and extends updates by one year.

See all posts